IFLIGHT-Commando 8

The Commando 8 ELRS 2.4G RF 500mW option only available to customers in the United States and European countries.

Such as Spain, Portugal, France, Netherlands, Italy, Poland, Germany, Belgium, Luxembourg, Austria, Denmark, Finland, Sweden, Bulgaria, Czech Republic, Hungary, Slovakia, Slovenia, Estonia, Greece, Lithuania, Latvia, Romania, Ireland, Croatia. If it is not the above country, we will contact the customer to cancel the order.

Orders that choose this option will be shipped from the US warehouse or European warehouse. 

It's finally here, the iFlight Commando 8 with fully integrated iFlight ExpressLRS hardware! No additional external module necessary to run ELRS. If you're planning to run another TX module, please checkout the optional add-on external module bay.

ExpressLRS TX modules developed in close cooperation with the ExpressLRS Team with firmware targets already released.

Checkout the official ExpressLRS website: https://www.expresslrs.org

Official ExpressLRS Quick Start: https://www.expresslrs.org/2.0/quick-start/getting-started/

Remember this is an Open Source Project and therefore free to use for everyone. If you want to support the Developers, please consider donating: https://opencollective.com/expresslrs

Internal iFlight ExpressLRS (ELRS) transmitter (additional fan for cooling)

Market's lowest crystal frequency deviation (low packet loss, high frequency stability)

Highest quality digital hall sensor gimbals for maximum precision

High-performance PCB Single and Dual Band (900/2400MHz) radio antennas

Inbuilt 4000mAh for up to 20h power (2x 2000mAh 18650 batteries)

Stock EdgeTX firmware with pre-installed Lua scripts

Several Gimbal Stick Ends available (stock 18mm)

Please use iFlight ELRS receivers coupled with our transmitter for maximum performance! We've probably achieved

market's best crystal frequency stability at a very low frequency deviation (only 11KHz in total at 51.99976MHz on the

crystal). Please checkout this article for further information https://www.expresslrs.org/hardware/crystal-frequency-error/?h=crystal+frequency

The 900MHz as well as 2400MHz band have outstanding performance and long range capabilities. If you're not sure what to get, please checkout the official ELRS Long Range Competition to see what has been achieved. https://www.expresslrs.org/2.0/info/long-range/

What can I expect? Due to local regulations, the 915MHz FCC region seems to have a better performance than the

868MHz EU region. The 2400MHz band works great in any region, has a higher packet rate up to 500hz. This is not a

common 2400MHz protocol and cannot be compared to anything prior on the market.

Single ELRS option includes 1x ELRS TX module (please select band) pre-installed in the back of the radio Cooling fan is

inside the flat back cover Single Band or Dual Band antenna option (for future upgrades or module changes) Dual

Band antenna option for convenient multi band use without changing the antenna

Dual-Band (868/915MHz+2.4GHz)

Single-Band (2.4GHz)

Single-Band (868/915MHz)

2x 5-axis menu buttons for full OpenTX or EdgeTX control

2x 2-position switches (can be used for arming; not momentary)

2x 3-position switches

2.4GHz system: SX1280

868/915MHz system: SX1276

ExpressLRS 2.4GHz // Max Output 500mW

ExpressLRS 868/915MHz // Max Output 1000mW

Radio Channels: 8

Input: Mini High Precision Digital Hall Gimbals with NMB bearings

Gimbal Stick Ends: Stock length 18mm

Charging: Type-C 20W Quick Charge

Battery: Built-in 4000mAh 1S2P 18650 Battery

Charging Connector: Type-C

Weight: 310g

1 x Commando8 (Please select your option)

2 x 18650 Li-Ion batteries included (pre-installed)